EJ系列自吸污水泵是参照欧洲标准的性能和尺寸改进设计而成,该系列泵具有自吸能力,泵体设计有修理孔,便于修理与清污,另设有耐磨板,提高了水泵的使用寿命。该系列泵可用于抽取含有磨蚀性固体颗粒的混合液体,其处理的液体粘度值最高可达到50mm2/s,广泛应用于工业、城市工程、海运、废料处理等领域,输送各种中性、碱性类清洁或不清洁液体。如含沙粒、泥浆或其它悬浮颗粒类液体、低粘度的石油产品;石灰乳、氢氧化钠,以及各类清洗、冷却、循环、烟雾净化或医疗急救产生的废水。
EJ系列自吸污水泵结构简单,性能可靠,体积小,重量轻,自吸高度最大能达到7m,能耗低,使用维修方便。
Wholesale Professional Design Single Stage 4hp 6.5hp 40hp Water Pump
Product Description
Pump type | EJ series horizontal single stage self priming sewage pump |
Design Standard | European standard |
Structure | Semi-open impeller,Single-Stage,Self-priming,Maintenance Hole,Wear Plate |
Flange | Pump casings are casted with flanges;Screw flange for discgarge size<100mm |
Casing | Cast Iron standard,Ductile Iron options on request |
Impeller | Ductile Iron standard,Bronze/ASTM304/ASTM316 options on request |
Shaft | ASTM1045 standard,ASTM304/ASTM316/ATSM420 options on request |
Shaft Seal | Mechanical Seal standard |
Discharge Size | DN40~200mm |
Head(H) | 4~55m |
Flow Rate(Q) | 4~468m3/h |
Self-priming Head | 3~7m |
Max Solids Size | 76mm |
Speed | 1450~3600rpm;lower speed(on request) |
Max Temperature | 80°C(standard) |
Conveying Medium | Neutral,acid or alkall clean or dirty liquids,containing sand,mud or solids in suspension |
Appliactions |
Waste water treatment plant,washing,cooling,circulation,smoke scrubbing,marine-ballasting&bilge,liquid transfer:clean or dirty water,mixed liquids,abrasive or corrosive liquids,low viscosity of petroleum products,etc. |